CCID readers come in , Dual Band (Plus) Loon reader Single band Loon reader Single band Nano reader Card Data Output Protocols supported CCID - RDR-xxxx6AxU Reads CSN/UID/PUPI data of all contactless cards (using both protocols) HID iClass SE ID or Seos (Requires HID SAM SE SIM/IC) (using both protocols) FIDO2 credential (Card type : FIDO2/U2F added) (using CCID protocol only) Default CCID and SDK output format will be different

 There are a few simple ways to locate the firmware version. The first way will be referencing the back label of the reader itself. Please see the image below. The “FW:” refers to firmware. The version is listed to the right side of the colon.    The second way to locate the firmware version is by downloading and using our pcProx configuration utility. If you do not already have it, you can download it here.

   Nano Readers RDR-6012AKU-V2 Nano SDK (HID Prox V2) Black Vertical USB Reader Raw Data  RDR-6021AKU Nano Keystroke (HID Prox) Black Horizontal USB Reader Keystroke  RDR-6022AKU Nano SDK (HID Prox) Black Horizontal USB Reader Raw Data  RDR-7011AKU Nano Keystroke (HID iCLASS SE & Seos) Black Vertical USB Reader Keystroke  RDR-7012AKU Nano SDK (HID iCLASS SE & Seos) Black Vertical USB Reader Raw Data  RDR-7511AKU Nano Keystroke 13.56MHz CSN Black Vertical USB Reader CEPAS CAN, HID iCLASS CSN, ISO 14443A CSN, ISO 14443B CSN, ISO 15693 CSN, MIFARE Classic CSN, MIFARE DESFire EV1 CSN, MIFARE Plus CSN, MIFARE Ultralight CSN, NFC Type 1 CSN (Topaz), NFC Type 3 CSN (Felica) Keystroke 

OEM-805N13KU - WAVE ID Plus OEM V2 Keystroke Micro module USB reader w/o cable This reader behaves the same as an RDR-80581AKU Key differences Non Housed No cable Micro module

 In general, the Plus reader's Power Consumption will between 70 mA typical, 150 mA maximum. For Ethernet Plus readers, the reader draw is approximately 16mA at 48V which would be less than 1 watt (768 mW).  

RDR-30542AKU - WAVE ID Bio SDK Badge & Fingerprint Combo Reader  Wave ID ® Plus reader with   Crossmatch Fingerprint sensor  PIV FAP10 Module or STQC FAP10 Module Array Size: 256 x 360 pixels / 12.80mm x 18.0mm imaging area Image resolution: 508 DPI Gray scale: 8-bit (256 levels) With biometric Co-processor TCD58H  Bluetooth Low Energy (BLE113) module USB Interface SDK reader supported by our Universal SDK (for the RFID portion)

   RDR-30MH1CKU-MXS - WAVE ID Mobile SP Keystroke HID Mobile Access & MIFARE Secure Black USB Reader Normal plus features, 4 configurations, 125 kHz and 13.56 MHz 6' USB Male Type A & 2.5" RAC Mini USB(RAC Mini USB only for HP) Keyboard emulation KT-SIM-SE4831 SIM in card holder supporting HID iCLASS, SE, Seos, Mobile Access, and HID MOB, Elite & Custom configuration cards NXP MIFARE AV2 SAM onboard PCB supporting MIFARE DESFire, Ultralight, Plus and Classic Secure File Data BLE Beacon not supported

RDR-80MH1AKU is a plus reader with the ability to read Mifare secure data Mifare cards supported Mifare Classic DESFire Plus and Ultralight cards are not supported. For that they would need the RDR-80M31AKU

All of our desktop USB readers will come with a 6ft USB cable by default. They can be ordered with shorter cables if desired.   A standard 6ft cable will be on readers with part numbers such as RDR-6081AKU. There will be no other letters or numbers after the part number. The C06 indicates a 6 inch cable. Example RDR-6081AKU-C06 The C16 would indicate a 16 inch cable. Example RDR-6081AKU-C16