Convertor board Wiring & Installation Tech Guide
Please note that this guide is intended for the following model numbers:
USB model OEM-W2USB-V3 USB model OEM-W2USB-V3 -CHUID Serial model OEM-W2RS232-V3 Please see this link for the correct manual for these type of boards:
https://www.rfideas.com/sites/default/files/2020-01/WiegandBoard-Manual.pdf
Wiring the board:
You will need four basic wiring connections from the reader to the board, W0, W1, Ground and Power.
W0 - connect GREEN wire W1 - connect WHITE wire Ground - connect BLACK wire Power - connect USB for USB models or RED wire for serial models USB models are powered by the USB cable connection **(If externally powered for any reason (VH), JP1 jumper must be pulled - see manual).