Please note that our EIP Ethernet readers are designed to work using a Generic Ethernet connection with the CompactLogix or ControlLogix series PLCs. However, we have had clients attempt to connect a Micrologix 800 PLC with success using Connected Components Workbench (CCW).&nbsp;&nbsp;
Please see this link for the Technical brief to connect a Micro800 PLC to a rfIDeas reader:
&nbsp;https://www.scadaware.com/blog/pcprox-rfid-micro800/
Please note that the Rockwell support page referenced in the Tech brief is now located here:
https://www.rfideas.com/page/rockwell-support-tools
&nbsp;

Please note that our EIP Ethernet readers are designed to work using a Generic Ethernet connection with the CompactLogix or ControlLogix series PLCs.  However, we have had clients attempt to connect a Micrologix 800 PLC with success using Connected Components Workbench (CCW).  
Please see this link for the Technical brief to connect a Micro800 PLC to a rfIDeas reader:
 https://www.scadaware.com/blog/pcprox-rfid-micro800/
Please note that the Rockwell support page referenced in the Tech brief is now located here:
https://www.rfideas.com/page/rockwell-support-tools
 



Readers with Micro800 PLCs

10 Step Quick Start Configuration utility guide for new version 6.05 

How to install the NT-Ware driver

Steps to load MOB key if not using MOBA101

How to Reset the reader using utility 6.05 version .

How to configure my Plus reader for 2 different card formats that use the same card type.

How do I configure my reader for HID 48 bit Corp 1000 cards?

How do I configure my AKB-P reader for the card ID?

How to configure a reader for Genetec

How do I Disable Telnet in my E241?

CARD ANALYZER VIDEO using the Configuration utility version 6.05

5 Step Quick Start Modbus manual

How do I setup a Bit Field Distribution for my PLC?

How to Use the Discovery Tool to locate my E241 device.

How do I install the AK0/BK0 driver?

IP67 Installation Guide

How to configure an AKU reader for use with Konica Minolta and PaperCut

How to configure pcSwipe

How do I configure my reader for a Mobile Credential?

                 How To Configure PoE Readers

How to connect to the card reader attached to a E241 device.

USB Wiring Diagram

How to use the Card Analyzer on a pcProx Plus

How do I export a current configuration from the rf IDEAS reader?

What are the Modbus Registers for the RDR-80581AKD-P reader?

How do I Configure my Plus reader to read different card types?

How do I configure my reader for 35 bit Corp 1000 cards?

How do I use Windows 10 PIN security and rfIDeas readers to log on to computers?