How to use the Card Analyzer on a pcProx Plus

1 min. readlast update: 10.18.2023

*please note that not all readers will support the card analyzer feature. You will need a USB model WAVE ID Plus / pcProx Plus reader.

First you will need to download and install the WAVE ID® Configuration Utility Plug your reader into the computer and open the configuration utility.

1 - Launch the card analyzer


2 - Click on Learn Card


3 - Place your card on the reader and leave it there, then click Start Scan.


4 - As the scan runs, if it identifies a card type, it will beep and display the card type in the top box. Let the scan finish completely before removing the card as multiple card types may appear.  


Once the anlyzer is done running, if you want to configure the reader then click Auto Config. On the next window click the Write button. If you do not want to configure the reader and you were just trying to identify a card, click exit.undefined

Was this article helpful?