To Reset the reader back to Factory Default:
Download the configuration utility version 6.05 here:
<a href="https://www.rfideas.com/sites/default/files/2021-03/rfIDEAS_ConfigurationUtility_6.0.5.zip" target="_blank">https://www.rfideas.com/sites/default/files/2021-03/rfIDEAS_ConfigurationUtility_6.0.5.zip</a>
Once connected to the reader, please follow these steps:&nbsp;
<img src="https://cdn.livechat-static.com/api/file/kb/file/8752831/e46e8e4f7c-755758f8b53177f6f507.png" alt="undefined" style="float:none;height: undefined;width: undefined"/>

To Reset the reader back to Factory Default:
Download the configuration utility version 6.05 here:
https://www.rfideas.com/sites/default/files/2021-03/rfIDEAS_ConfigurationUtility_6.0.5.zip
Once connected to the reader, please follow these steps: 
 


How to Reset the reader using utility 6.05 version .

10 Step Quick Start Configuration utility guide for new version 6.05 

How to install the NT-Ware driver

Steps to load MOB key if not using MOBA101

How to configure my Plus reader for 2 different card formats that use the same card type.

How do I configure my reader for HID 48 bit Corp 1000 cards?

How do I configure my AKB-P reader for the card ID?

How to configure a reader for Genetec

How do I Disable Telnet in my E241?

CARD ANALYZER VIDEO using the Configuration utility version 6.05

5 Step Quick Start Modbus manual

How do I setup a Bit Field Distribution for my PLC?

How to Use the Discovery Tool to locate my E241 device.

How do I install the AK0/BK0 driver?

IP67 Installation Guide

How to configure an AKU reader for use with Konica Minolta and PaperCut

How to configure pcSwipe

How do I configure my reader for a Mobile Credential?

Readers with Micro800 PLCs

                 How To Configure PoE Readers

How to connect to the card reader attached to a E241 device.

USB Wiring Diagram

How to use the Card Analyzer on a pcProx Plus

How do I export a current configuration from the rf IDEAS reader?

What are the Modbus Registers for the RDR-80581AKD-P reader?

How do I Configure my Plus reader to read different card types?

How do I configure my reader for 35 bit Corp 1000 cards?

How do I use Windows 10 PIN security and rfIDeas readers to log on to computers?