The easiest way to Make the IP address Static is to use the Web interface. &nbsp;Put the IP address of the reader in a Browser to open the Web interface. &nbsp;Then, UNcheck the DHCP Enabled checkbox and APPLY Setting. &nbsp;This will change the reader from DHCP to use Static IP addressing. &nbsp;
&nbsp;
<img src="https://cdn.livechat-files.com/api/file/kb/file/8752831/ac40c567dd-5589d961be0a2c1cd128.png">

The easiest way to Make the IP address Static is to use the Web interface.  Put the IP address of the reader in a Browser to open the Web interface.  Then, UNcheck the DHCP Enabled checkbox and APPLY Setting.  This will change the reader from DHCP to use Static IP addressing.  

 



 How to Change IP and make Static on Ethernet readers using the Web Interface

10 Step Quick Start Configuration utility guide for new version 6.05 

How to install the NT-Ware driver

Steps to load MOB key if not using MOBA101

How to Reset the reader using utility 6.05 version .

How to configure my Plus reader for 2 different card formats that use the same card type.

How do I configure my reader for HID 48 bit Corp 1000 cards?

How do I configure my AKB-P reader for the card ID?

How to configure a reader for Genetec

How do I Disable Telnet in my E241?

CARD ANALYZER VIDEO using the Configuration utility version 6.05

5 Step Quick Start Modbus manual

How do I setup a Bit Field Distribution for my PLC?

How to Use the Discovery Tool to locate my E241 device.

How do I install the AK0/BK0 driver?

IP67 Installation Guide

How to configure an AKU reader for use with Konica Minolta and PaperCut

How to configure pcSwipe

How do I configure my reader for a Mobile Credential?

Readers with Micro800 PLCs

                 How To Configure PoE Readers

How to connect to the card reader attached to a E241 device.

USB Wiring Diagram

How to use the Card Analyzer on a pcProx Plus

How do I export a current configuration from the rf IDEAS reader?

What are the Modbus Registers for the RDR-80581AKD-P reader?

How do I Configure my Plus reader to read different card types?

How do I configure my reader for 35 bit Corp 1000 cards?

How do I use Windows 10 PIN security and rfIDeas readers to log on to computers?

WaveID Bio 

E241 - 5 STEP FIRMWARE UPGRADE GUIDE

Checking firmware in 6.05 Configuration Utility

How do I use the Rockwell Keystroke Output Capture Utility?

How do I Use the Card Analyzer in the WaveID Plus reader?

Orange Pack ID Video

ETHERNET READERS - Quick Start - Assigning an IP

How to change your Card type on Plus readers

ROCKWELL RA READER TECH GUIDE – screen shots of RA reader

Instructionals