Ethernet reader guide

1 min. readlast update: 11.10.2026

 

Technical Guide

Ethernet Readers

Current rf IDEAS® Ethernet PoE reader models and their part numbers

Overview

rf IDEAS® Ethernet PoE readers are powered over Ethernet and come in two protocol versions. The third letter of the part number identifies the protocol. E means Ethernet only (no EIP). B means EIP, for direct connection to Rockwell PLCs.

Current Readers

Suffix

Protocol

Use when

Replaces

BKE-P

Ethernet PoE (no EIP)

Standard Ethernet PoE access control

AKE-P

BKB-P

Ethernet PoE with EIP

Connecting to a Rockwell PLC

AKB-P

Part Numbers by Form Factor

Form Factor

Ethernet PoE, no EIP (BKE-P)

Ethernet PoE with EIP (BKB-P)

Surface Mount

RDR-805W1BKE-P

RDR-805W1BKB-P

Surface Mount IP67

RDR-805W1BKE-P with KT-IP67 kit

KT-805W1BKB-P-IP67

Desktop

RDR-80531BKE-P

RDR-80531BKB-P

Selection Guidance

•  Rockwell PLC connection: Select a BKB-P reader from the table above. These include the EIP protocol the connection requires.

•  Standard Ethernet PoE: Select a BKE-P reader. It provides PoE power and Ethernet communication without EIP.

•  Verify before ordering: Check the suffix against your system requirements. E means no EIP, and B means EIP.

Legacy Models

Legacy Model

Protocol

Replacement

AKE-P (all form factors)

Ethernet PoE, no EIP

BKE-P

RDR-805W1AKB-P

Ethernet PoE with EIP

RDR-805W1BKB-P

KT-805W1AKB-P-IP67

Ethernet PoE with EIP

KT-805W1BKB-P-IP67

RDR-80581AKB-P

Ethernet PoE with EIP

RDR-80531BKB-P

Reference Documentation

•  PoE Manual (Ethernet PoE operation): https://www.rfideas.com/sites/default/files/2020-01/PoE_Manual.pdf

•  EIP Manual (EIP configuration for Rockwell PLCs): https://www.rfideas.com/sites/default/files/2020-01/EIP_Manual.pdf

Was this article helpful?